Booting from a PenDrive
Booting eLua from an USB stick
This is follow up of this tutorial. After completing it you'll be able to boot eLua directly from your USB stick (provided, of course, that your computer can boot from an USB stick, which is true for most computers nowadays). You might want to check the boot your PC in eLua tutorial first for more details. If you have an old USB stick that you don't use anymore, and/or the shear geekness of this idea makes you feel curious, this tutorial is definitely for you :)
As mentioned here, the code won't try to access any kind of storage (HDD, CDROM, floppy), not even for reading, so you don't need to worry about that. Also it doesn't try to reprogram your video card registers, so it can't harm it or your monitor. It only implements a "protected mode keyboard driver" that can't physically damage anything in your system. In short, I made every effort to make the code as harmless as possible. I tested it on 5 different computers and in 2 VirtualBox emulators, and nothing bad happened. That said, there are no warranties of any kind. In the very unlikely event that something bad does happen to your system, you have my sincere sympathy, but I can't be held responsible for that. Also, I can't be held responsible if you mess up your HDD by failing the GRUB installation procedure (even though, once again, this shouldn't be possible unless you really insist on messing it up). If you're new to computers or Linux, this tutorial might not be for you. Your call.
To have your own bootable eLua USB stick you'll need:
- an USB stick. I tested this on an 128M USB stick, because it's the smallest I could find. You should be OK with a 4M stick or even a 2M stick
- a computer running Linux. I use Ubuntu, but any other distribution is fine.
- GRUB. Since you're running Linux, chances are you're already using GRUB as your bootloader. If not, you must install it on your HDD, or at least know how to install it directly on the USB stick. I won't go into details here, google it and you'll find lots of good articles about GRUB. This tutorial assumes that you're using GRUB as your bootloader.
- The eLua i386 ELF file, see here for instructions on how to obtain it. OR download the eLua source distribution and compile it for the i386 architecture using a toolchain that you can build by following this tutorial.
- a text editor to edit your GRUB configuration file.
The rest of this tutorial assumes that you're using Linux with GRUB, and that GRUB is located in /boot/grub, which is true for many Linux distributions.
Backup your stick
Since the stick is going to be formatted, make sure to backup the data from your stick first (you can copy it back after finishing the tutorial).
Partition and format your stick
Depending on your stick, this step might not be required, but chances are you'll need to re-partition and re-format your stick before installing GRUB on it. The problem is that many sticks have a very creative, non-standard partition table, and GRUB doesn't like that. I looked at the original partition table of my eLua USB stick and it scared me to death, so I had to follow this procedure. In short, you'll need to delete all the partitions from your stick, create a new partition, and then format it. For a step by step tutorial check here.
Install GRUB on your stick
First, mount your freshly formatted stick (I'm going to assume that the mount directory is /mnt):
$ sudo mount /dev/sda1 /mnt
(of course, you'll need to change /dev/sda1 to reflect the physical location of your USB stick. You should know the physical location from the previous step). Then copy the required GRUB files to your stick:
$ cd /mnt $ mkdir boot $ mkdir boot/grub $ cd /boot/grub $ cp stage1 fat_stage1_5 stage2 /mnt/boot/grub
Copy the eLua ELF file (elua_lua_i386.elf in this example, change the name if needed) to the GRUB directory as well:
$ cp elua_lua_i386.elf /mnt/boot/grub
Create a menu.lst file for GRUB with you favorite text editori (I'm using vim):
$ cd /mnt/boot/grub $ vim menu.lst title eLua root (hd0,0) kernel /boot/grub/elua_lua_i386.elf boot
Now it's time to actually install GRUB on the stick.
$ sudo -s -H # grub Now we need to find the GRUB name of our USB stick. We'll use the "find" command from GRUB and our eLua ELF file to accomplish this: grub> find /boot/grub/elua_lua_i386.elf (hd2,0) GRUB should respond with a single line (like (hd2,0) above). If it gives you more than one line, something is wrong. Maybe you also installed eLua on your HDD? If so, delete the /boot/grub/elua_lua_i386.elf file from your HDD and try again. You might get a different (hdx,y) line. If so, just use it instead of (hd2,0) in the rest of this tutorial. grub> root (hd2,0) grub> setup (hd2) Checking if "/boot/grub/stage1" exists... yes Checking if "/boot/grub/stage2" exists... yes Checking if "/boot/grub/fat_stage1_5" exists... yes Running "embed /boot/grub/fat_stage1_5 (hd2)"... 15 sectors are embedded. succeeded Running "install /boot/grub/stage1 (hd2) (hd2)1+15 p (hd2,0)/boot/grub/stage2 /boot/grub/menu.lst"... succeeded Done. grub> quit
That's it! Now reboot your computer, make sure that your BIOS is set to boot from USB, and enjoy! See using eLua for instructions on how to use your new toy :).
As usual, if you need more details, you can contact us.